Specifications:
MAGNUM CTCBA 4004
· Cold water pressure washer
· 4gpm @ 4000psi
· Honda 13HP Engine
· Belt driven Tri-plex oil bath pump
· 3600psi safety relief
· Pressure trapping unloader
· Remote downline / low pressure soap injection
· Stationary high pressure hose reel
· 50’ R2 wire 5800psi high pressure hose
· Five quick connect nozzles
· 275 Gallon Water tank plumbed with a 2" dump valve for quick draining
Trailer Specifications: (Image Shown has a lift gate on the trailer. Our Standard Unit does not have a gate. This will be an additional charge.)
· Single axle 3500lb.
· Dimensions: 5' wide X 8' length
· DOT approved wiring & lights
· 2x10 Pressure Treated Wood Plank Flooring
Warranty Information
· 5 Year back end pump warranty
· 90 Day warranty on wear parts
· 1 year labor warranty
Unit is Brand New & includes manufacturers' warranty (details above). Technical assistance will be available to the purchaser of the unit.
SYSTEM TYPE:
Cold Water, high pressure, gas powered, portable pressure washer. Unit has appropriate fully automatic safety controls. Unit conforms with CGA, CSA, &/or ETL Certification. Manufactured by an American Based Company and must conform to CETA Performance Standards and the Underwriters Laboratories standard for pressure washers – UL-1776.
GENERAL SPECIFICATIONS:
Discharge 3.7 GPM
Pressure 3500 PSI
Gas Engine 13 HP / 389CC HONDA
HOSES:
All Hoses 3/8” ID double steel braid type exceeding SAE100R2 performance specifications. Equipped with a swivel and safety protection bend restricting collars. Rated Rated at 5800 PSI at 250° F.
TRIGGER GUNS:
Insulated pistol type safety shut off gun supplied shall be rated at 10 gpm, 5000 psi, and 300° F. Constructed from Fiberglass – reinforced polyester with brass and stainless steel valves and seats.
WANDS:
A 48” single lance wand with side grab handle on wand for operator protection.
NOZZLES:
Appropriate high pressure nozzles for single gun operation shall be supplied in 0° 15° 25° & 40° flat spray pattern plus a brass soap nozzle. The nozzles shall be of a through hardened 420 stainless steel material with an interlock coupler nipple made of annealed 303 stainless steel with 80 Rockwell hardness rating.
DRIVES:
Belt drive system with cast iron bushed bore pulley, grip notch V-section size B belts, and adjustment plate for proper belt tension and alignment. All belts to be covered by safety machine cover.
HIGH PRESSURE PUMP:
Triplex, Ceramic plunger, oil bath crankcase type with forged brass head, mounted on a vibration isolation deck. Pump bypass loop shall be equipped with 145° thermal relief valve.
UNLOADER VALVE:
The pressure washer shall be equipped with a pressure trapped unloader valve suitable for single gun operation rated for a minimum of 8 gpm at 3900 psi.
FRAME:
Unit mounted to a heavy 100% stainless steel - vibration isolation frame. Components to be located for ample service/inspection accessibility. HOSE QUICK CONNECTIONS:
Quick couple connectors with stainless steel retainer ring & support balls.
SAFETY RELIEF VALVE:
A high pressure safety relief valve shall be installed as a secondary safety device in the event an over pressurization condition occurs. This device shall be located at the outlet of the pump and shall be set at 3900 psi.
Shipping - We have many shipping options. Shipping to most states is roughly $2.95 per mile. Contact us for a no obligation freight quote.
